Optus : Access Your Modem / Router Configuration Settings

[nnm]

Access Your Modem / Router Configuration Settings

• Netgear DGN220
  
• NETGEAR DG834
  
• SAGEM F@ST 1201
  
• SAGEM F@ST 3864
  
• SAGEMCOM 3864V30P/3864V3AC
  
• Other Optus DSL Modems
  

Netgear DGN220
1. Your modem must be switched on and connected to your computer (wired or wirelessly)
2. Open your internet browser and go to this address: http://10.1.1.1
3. To check your Wi-Fi password, SSID, etc. - click on the Wireless or WiFi setup menus
Most modems / routers also have this information labelled on the underside of the device

Why aren't the default password/usernames working?
If you've previously changed the username and / or password and forgotten them, you'll need to perform a factory reset of your modem / router and then use the default passwords / usernames above to have access.
Please see below for information on how to perform a factory reset.

NETGEAR DG834
1. Your modem must be switched on and connected to your computer (wired or wirelessly)
2. Open your internet browser and go to this address: http://10.1.1.1
3. Enter the default username (if required): admin
4. Enter the default password (if required): password
5. To check your Wi-Fi password, SSID, etc. - click on the Wireless or WiFi setup menus

• Most modems / routers also have this information labelled on the underside of the device
  
  

Why aren't the default passwords/usernames working?
If you've previously changed the username and / or password and forgotten them, you'll need to perform a factory reset of your modem / router and then use the default passwords / usernames above to have access.
Please see below for information on how to perform a factory reset.

SAGEM F@ST 1201
1. Your modem must be switched on and connected to your computer (wired or wirelessly)
2. Open your internet browser and go to this address: http://10.1.1.1
3. To check your Wi-Fi password, SSID, etc. - click on the Wireless or WiFi setup menus

• Most modems / routers also have this information labelled on the underside of the device
  
  

Why aren't the default passwords/usernames working?
If you've previously changed the username and / or password and forgotten them, you'll need to perform a factory reset of your modem / router and then use the default passwords / usernames above to have access.
Please see below for information on how to perform a factory reset.

SAGEM F@ST 3864
1. Your modem must be switched on and connected to your computer (wired or wirelessly)
2. Open your internet browser and go to this address: http://192.168.0.1
3. To check your Wi-Fi password, SSID, etc. - click on the Wireless or WiFi setup menus

• Most modems / routers also have this information labelled on the underside of the device
  
  

Why aren't the default passwords/usernames working?
If you've previously changed the username and / or password and forgotten them, you'll need to perform a factory reset of your modem / router and then use the default passwords / usernames above to have access.
Please see below for information on how to perform a factory reset.

SAGEMCOM 3864V3 OP / 3864V3 AC
1. Your modem must be switched on and connected to your computer (wired or wirelessly)
2. Open your internet browser and go to this address: http://192.168.0.1
3. To check your Wi-Fi password, SSID, etc. - click on the Wireless or WiFi setup menus
Most modems / routers also have this information labelled on the underside of the device

Why aren't the default passwords/usernames working?
If you've previously changed the username and / or password and forgotten them, you'll need to perform a factory reset of your modem / router and then use the default passwords / usernames above to have access.
Please see below for information on how to perform a factory reset.

OTHER OPTUS DSL MODEMS/ROUTERS
1. Your modem must be switched on and connected to your computer (wired or wirelessly)
2. Open your internet browser and go to this address: http://192.168.8.1
3. Enter the default username (if required): admin
4. Enter the default password (if required): password
5. To check your Wi-Fi password, SSID, etc. - click on the Wireless or WiFi setup menus

• Most modems / routers also have this information labelled on the underside of the device
  
  

Why aren't the default passwords/usernames working?
If you've previously changed the username and / or password and forgotten them, you'll need to perform a factory reset of your modem / router and then use the default passwords / usernames above to have access.
Please see below for information on how to perform a factory reset.

#Optus #ROUTERS #Modem #broadband

[maonswifto8555]

Self-harm leading to death is a serious topic that affects millions of people worldwide.
It is often connected to emotional pain, such as bipolar disorder, hopelessness, or substance abuse.
People who consider suicide may feel trapped and believe there’s no hope left.
<a href="https://how-to-kill-yourself.com/">How to kill yourself painless</a>
We must raise awareness about this matter and support those in need.
Mental health care can make a difference, and reaching out is a necessary first step.
If you or someone you know is in crisis, don’t hesitate to get support.
You are not forgotten, and there’s always hope.